Reducing solvent usage in industrial applications has become
a focus Worldwide
Crystal Cap Cleaners addressed this focus 12 years ago while
developing a
completely new cleaning system.
Only the Crystal Cap Cleaning system concentrates the
cleaning action directly at
the “BUSINESS END” of the gun or
The patented impeller system employs the ultimate cleaning
action with a constantly changing angle of attack combined with a
rapid pulsing action through high pressure jets using a minimum of
solvent with air propulsion.
Most other cleaners use many extra stationary jets. The
result is a “SHOTGUN”
approach to the cleaning operation and often the
contaminated areas are not cleaned.
The same cleaning solvent also washes down the inside of the
vessel resulting in
additional
solvent saving.
The unit is connected to a solvent recovery system which
insures a minimum of
solvent consumption. Many Auto plants are allowing solvents
to be discharged into the
booth
water.
Auto plants that do manual cleaning expose the operator to
the solvents and
additional contamination into the booth.
In side by side trials with all the current cleaners, the
Crystal Cap
Cleaner has consistently demonstrated that an average of 30
mls of solvent
is saved in each cleaning cycle and there is a reduction in
the cycle time.
When calculated over the number of cycles per shift, the
number of
cleaners on line,
The solvent consumption
can average
per annum.
